Tiktok:
  • 38917
    Xếp hạng toàn cầu
  • 658
    Xếp hạng Quốc gia / Khu vực
  • 1.3M
    Người theo dõi
  • 785
    Video
  • 17.22M
    Thích
  • Những video mới
    20
  • Người theo dõi mới
    29.77K
  • Chế độ xem mới
    54.15M
  • Lượt thích mới
    654.27K
  • Bài đánh giá mới
    5.28K
  • Chia sẻ mới
    61.03K

Kruger Construction  Xu hướng dữ liệu (30 ngày)

Kruger Construction Phân tích thống kê (30 ngày)

Kruger Construction Video Hấp dẫn

Kruger Construction
This is the @Kneel It It’s great for installing floor, grinding floors and pretty much any task that you need to move around on your knees • They just added a chest support adaptor to help you lean forward and take the pressure off your back • This thing is completely tool free and we have never had a problem with it scratching a floor . . . #tools #construction #kneelit #floor #flooring
28.23M
371.86K
1.32%
4.07K
2.92K
29.56K
Kruger Construction
Over 20 hrs already on my little Kubota! • They say grease the loader every 8-10 hrs with normal use. I’m sure it’s a bit overkill • These are pins on bushings that I’m greasing not sealed bushings so don’t get wild. • 12 spots to grease on the loader alone. If you are running equipment this 18v Makita greasegun gets the job done quick @Makita Tools USA . . . #tools #construction #makitapartner #makita #kubota #kubotatractor
5.33M
53.62K
1.01%
1.27K
271
4.42K
Kruger Construction
Between the snowblower and snow plow we get a lot of rocks on the lawn over winter • Using this Makita paddle sweeper just makes it so easy to clean up • This is an attachment that goes into the 18v X2 power head @Makita Tools USA . . . #tools #construction #makita #makitatools #lawn #spring #cleanup #landscape
5.16M
27.56K
0.53%
1.01K
353
12.93K
Kruger Construction
Talk about a compact portable pressure washer! • This @EGO is the smallest I’ve seen with this type of pressure • 2100 psi with 1.2 gpm • You can hook it up to a hose or siphon from a bucket or jug • It really came handy when I had a vehicle in a car show and it rained all the way there, I rinsed it off with this and pulled into the building . . . #tools #construction #egopowerplus #pressurewasher #clean #cleaning #Summer #yardwork
4.66M
34.69K
0.74%
2.02K
510
3.27K
Kruger Construction
#ad Check out this Dewalt 20v Grabo! These are extremely helpful because you are able to add a handle to most flat surfaces • It can support up to 265 lbs. It also has an alarm to let you know if it’s losing suction. @DEWALT #dewaltpartner . . . #tools #construction #dewalt #dwtough
4.21M
56.93K
1.35%
2.26K
545
22.27K
Kruger Construction
Changing the taillights on the 4Runner is much easier than changing them on the front • These are the LUXX series from @AlphaRexUSA and as you can see it’s a couple bolts and they are completely plug and play • All that’s needed for this one is the @gearwrenchtools ratchet, extension and socket. Just make sure not to drop the nuts down the body or you are going to be doing some fishing • @4Runner Lifestyle has a big sale right now on AlphaRex lights . . . #tools #4runner #alpharex #gearwrench #building #overland
4.06M
73.72K
1.81%
979
434
3.37K
Kruger Construction
No more heat shrink connections for me! • I saw this @SpliSeal.com @semashow and was sold on it! • The heatgun runs on @RYOBI Tools USA batteries which they include in the kit but I wanted to use the more powerful new Edge battery • Make you connection as it heats up, spray some mold release in the mold and put in your connection • Clamp it shut and inject the sealant. A minute later it’s ready to go • This will be clutch when I wire the @Diode Dynamics lights on the 4Runner, it even makes me want to redo all my wiring on the Tacoma . . . #tools #construction #tacoma #gearwrench #wiring #spliseal
3.88M
98.71K
2.55%
4.77K
1.44K
19.4K
Kruger Construction
I’ve been asked a lot if the silicone bucket liners like the @bucketsaver_ work for drywall mud • If you are looking for it to dry fully and fall out in a chunk like thinset it won’t, the bottom layer won’t dry • It does cleanup quick with a hose but it doesn’t completely dry • Running the @FLEXPOWERTOOLSNA mixer that we got before the tools were first originally released and it’s still going strong, I can’t imagine how many boxes of mud it’s mixed now as well as thinset, grout and even concrete . . . #tools #construction #flex #flexpartner #flexpowertools #drywall #drywaller
3.34M
23.91K
0.72%
141
106
588
Kruger Construction
Still a bit to cold to turn on the outside tap but I’m eager to try this Makita 40v pressure washer so I’ll use a bucket • On high hooked up to the house tap it will do 1,668 PSI and 1.85 GPM They say runtime of up to 60min with two 5.0Ah batteries • It comes with 2 nozzles, one adjustable one which I used on this video and then a turbo sprayer to get off the stubborn stuff • Once it warms up I will start washing some cars and post more on it @Makita Tools USA . . . #tools #construction #makita #makitapartner #wash #clean #pressurewashing
2.61M
20.78K
0.8%
1.11K
231
2.01K
Kruger Construction
Here’s the @SpliSeal.com hanger mold • This are a complete waterproof connection using a potting polymer. • I’m trying out this @felowerkzeugfabrik wire stripper I got from @KCITools It works really good on the 14g wire. It works on 24g-10g . . . #tools #construction #mechanic #wiring
2.05M
46.77K
2.28%
1.12K
369
4.98K
Kruger Construction
Let the 4Runner build begin! Last year we teamed up with @gearwrenchtools to do a 2023 Tacoma that we took to @SEMA Show • This year we are doing a 2021 4Runner • First we gotta change these headlight to the @AlphaRexUSA Nova series Way brighter and they have a very cool startup sequence and daytime running light • Funny that once again we had to pull the bumper to change the headlight assembly but it was pretty easy and as you guys know I really enjoy working on vehicles with my Dad • A lot more to come every Saturday! We have teamed up with @4Runner Lifestyle for a lot of cool parts . . . #tools #mechanic #4runner #4runnerlifestyle #alpharexusa #gearwrench #gearwrenchtools #builtnotbought
1.86M
20.31K
1.09%
374
166
746
Kruger Construction
Here we go! Got a Topogrphic Pro Grille for the 4Runner from @Taco Vinyl • Super straight forward to put on but the little factory clips are an absolute pain to release, the @gearwrenchtools pick set absolutely saved the day . . . #tools #gearwrench #gearwrenchtools #mechanic #4runner #tacovinyl #toyota #toyota4runner
1.48M
18.82K
1.27%
236
143
778
Kruger Construction
I finally put a cap on my worktruck • I went with the @smartcap EVOa Adventure • It comes in a box and has some assembly. The most important part is to torque it properly. That’s where the @gearwrenchtools 1/4” 120xp 30-200 in/lbs torque wrench comes in handy • This cap is powder coated stainless steel and has a vent up top to make positive pressure while driving so you don’t get dust inside • More to come on this work truck build . . . #tools #construction #Gearwrench #gearwrenchpartner #smartcap #ford #fordraptor #worktruck
1.4M
13.98K
1%
236
129
1.15K
Kruger Construction
This is genius! Continues Bag system from @Hilti North America • I wanted to show that even with super fine dust the filter won’t plug up because it taps itself out well working • There is now no pulling the vac apart to clean out the canister, just zip tie the bottom of the bag, cut it and get back to work! • This system worked amazing for grinding floors and I know it would work the same for drywall dust . . . #tools #construction #Hilti #hiltitools #hiltipartner #flooring #concrete
1.35M
13.68K
1.01%
230
178
1.87K
Kruger Construction
I can now confirm that the @kinetic.customs Titanium Nighthawk is even nicer in person • Made sure I followed their instruction by torquing the bolt to 29.5 ft-lb with the @gearwrenchtools torque wrench • Little bit of a Optimus Prime vibe going on here with the colors I picked . . . #tools #construction #hammer #titanium #gearwrench #workofart #kineticcustoms #titaniumhammer
1.32M
7.61K
0.58%
69
106
225
Kruger Construction
Installed some aluminum exhaust ports for these bay doors @ExceedAutomotive • Used a @SpyderProducts 4-1/2” tarantula holesaw and as you can see it made quick work, it’s nice not having to dig the material out either • Used this absolute powerhouse @Hilti North America 4 speed drill, Hilti has one of the best anti kickback systems I’ve used but I still like to run the side handle with the type of power this drill puts out • Now they can run cars with the hose hooked up to the exhaust while keeping the doors closed . . . #tools #construction #automotive #mechanic #hiltipartner #spyderpartner #spyderproducts #hilti #hiltitools
978.32K
4.92K
0.5%
26
67
115
Kruger Construction
Couple quick 4Runner mods that only need a @gearwrenchtools Philips screwdriver • First I swapped out the 3rd break light with a @morimotolighting • Next the door courtesy lights with these @4runnerlifestyle lights • Last I did the license place lights with a led upgrade All this stuff I got from @4Runner Lifestyle • Soon I’ll be doing full suspension and starting in the body mods. . . . #tools #4runner #4runnerlifestyle #gearwrench #offroad #toyota #toyota4runner4x4
662.8K
26.28K
3.96%
251
51
516
Kruger Construction
Check out this New @Crescent Tools SiteRunner 3 shelf folding cart • Each shelf can fold up to 100 lbs and it has lots of spots to hang tools • It also has locking casters . . . #crescentpartner #tools #construction #crescenttools
564.51K
6.08K
1.08%
329
103
1.84K
Kruger Construction
The amount of mods you can do on the 4Runners seems endless, 3 I’m doing here just on a mirror! • It’s nice to get rid of those little convex stick on mirrors and add these built in ones from @4Runner Lifestyle • While I’m at it I added these smoked out sequential turn signals also from @4runnerlifestyle • The last one is the @mesocustoms puddle light, the old ones were so dim I didn’t even know they were there. These are also available @4runnerlifestyle • I did all this with just one @gearwrenchtools phillips screwdriver • We are hardly even starts on this build and I feel like I’ve changed so much! . . . #tools #gearwrenchpartner #gearwrench #4runner #4runnerlifestyle #mechanic #overland #toyota #toyota4runner #mesocustoms
556.66K
13.53K
2.43%
163
51
484
Kruger Construction
Giving this New Gen 2 Nuron cut off saw a go! • This walkway/slab slopes towards the house so its time to go, I’m going to build little deck here instead • I had 2 batteries that haven’t been charged in months, some other brands would have almost fully lost their charge but these Nuron batteries were still showing full • I got just over 20ft at full depth in this old concrete and I wasn’t taking it easy on this saw • The extra power is noticeable on this Gen 2 • Also I love the battery powered water tank, no pumping! @Hilti North America . . . #tools #construction #Hilti #hiltipartner #concrete
506.04K
6.6K
1.3%
64
58
289
Hãy tham gia nhóm Facebook TikTok Inspiration của chúng tôi
Chúng tôi sẽ chia sẻ những video sáng tạo mới nhất và bạn có thể thảo luận với mọi người về bất kỳ câu hỏi nào mà bạn có!
TiktokSpy from IXSPY
Các công cụ kỹ thuật số dành cho những người có ảnh hưởng, đại lý, nhà quảng cáo và thương hiệu.
Công ty bên thứ ba độc lập, Không phải trang web chính thức của TikTok.
Copyright@2021 ixspy.com. All Rights Reserved